Gulfport, MS 7206-02 NTEA Blacklidge Emulsions, Inc. North Bend, OH 7206-01 NTEA Blacklidge Emulsions, Inc. Using bitumen SS1 is environmental friendly since any flammable material or kerosene is not used and firing of the bitumen during the usage would be zero. Asphalt emulsion shall be measured by mass in tonnes as specified in the. Asphalt Blends, LLC Channahon, IL 7225-01 SS-1h Bi-State Emulsions Maplewood, MO 427-01 CRS-2 CRS-2P CQS-1hP HFE-90, HFE-150, HFE-300 HFRS-2 HFRS-2P RSP PEA SS-1h SS-1hP NTEA Blacklidge Emulsions, Inc. Percentage of emulsifier is 3-5% and total water content is between 30-50%.By adding Emulsifier to bitumen and water we put anionic electron on the material and each particle of bitumen became like as circle with the size of 0.001 to 0.01 mm and become floating in the water.
#Ss 1h asphalt emulsion iso#
By adding emulsifier into water and bitumen that is the alkaline salt with Ammonium Salt in the high-speed mixer at ISO condition making bitumen SS-1h. Manufacturer: Ergon Asphalt & Emulsions, Inc. In normal conditions and without emulsifier the two parts of emulsion SS1 is unstable and quickly will segregate. Product identifier SS-1H Other means of identification None. The particle size of the emulsion is 0.1 to 5 micron. Usage of anionic bitumen emulsion SS-1h is two phases of water and bitumen which are not possible to mix and the first interphase is inside of outer phase. Such characteristics are imparted to the asphalt emulsions through the use of emulsion-conditioner compositions comprising a partially desulfonated lignosulfonate, preferably an anionic or nonionic emulsifying agent and, optionally, a thickene. This result is not ideal to be used as a coating because it cannot be applied to substrates.Īnionic Bitumen emulsion SS-1h is slow-setting, anionic type and are further characterized by their ability to remain stable on storage although produced with equipment that generates a wide range of shearing forces. When an Anionic emulsion is mixed with a Cationic emulsion a strong bond develops and the result is the changing of the substance to a solid.
It is a dispersion of small droplets of penetration grade asphalt cement in water with the aid of an emulsifier.
#Ss 1h asphalt emulsion code#
Code Approvals / Complianceĭel-Val 505 SS-1h Tack Coat meets the following specifications when tested in accordance with ASTM D977.An Anionic emulsion has a negative charge, most of the things in the world are Anionic and that is why the majority of Research and Development, formulating, and lab testing has been done in the Industrial Coatings Industry to make coatings from Anionic systems. Bitumen Emulsion SS 1 / SS 1 h are slow-setting, anionic type of asphalt emulsions manufactured according to specifications of ASTM D 977 Standard Specifications for Anionic Emulsified Asphalt.
Keep from overheating maintaining a storage and application temperature between 55☏ and 130☏. Provide material consisting of asphalt emulsion SS-1 or SS-1h, conforming to 702.04, blended with rubber compound, conforming to 702.14, to produce a residual mixture of asphalt and rubber solids having a composition of 95 ± 0.3 percent asphalt and 5 ± 0.3 percent rubber solids by weight. PrecautionĪvoid contaminants and over-exposure to air and foreign chemicals. Cleanup Del-Val 505 SS-1H Tack CoatĬlean tools with Del-Val Orange Cleaner & Degreaser or mineral spirits, taking necessary precautions when handling combustible liquids. For best results, the weather should be clear with no threat of rain for 48 hours at the time of application. SS-1 is an anionic slow setting asphalt emulsion primarily used as a tack coat - typically providing that glue to bond an existing base pavement layer to. It is a low viscosity emulsion used mainly for prime. Its lower penetration, when compared to SS-1 with a softer base, makes it ideal for warmer climates and should only be applied when temperatures are expected to remain above 55☏ for the next 24 hours. Prime SS-1K / CSS-1 cationic bitumen emulsion is an emulsified asphalt containing minimum 57 bitumen. Once dry, apply finish coat material over Del-Val 505 SS-1h Tack Coat.
ApplicationĪpply Del-Val 505 SS-1h Tack Coat using a brush, squeegee, or heavy duty spray equipment. The polybetaine emulsifiers of the present.
Del-Val 505 SS-1h Tack Coat is used for all paving uses and should be applied at a higher temperature to promote the best curing results. In this example slow setting emulsions (SS-1h Emulsions) were formulated with 160/180 penetration asphalt.
0 kommentar(er)
